OTHER PRODUCTS IN THIS CATEGORY

MOBIHEL BASE MIX

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

MOBIHEL BASE MIX is a solvent–based basoat used in double–layer coating systems in combination with one of the MOBIHEL clearcoats. It is used for the final painting of personal vehicles, buses, trucks and other vehicles as well as for other metal objects and is part of the MOBIHEL Mixing System. The desired colour can be obtained by using the MOBIHEL Colour Navigator Formulation Software or by searching in the Mobihel Colour tools.

KEY CHARACTERISTICS:

• Very fast flash–off and in–depth film drying.
• Further layers can be applied after the surface gets matt.
• Excellent spraying properties.
• Uniform results and effect properties.
• Very easy fade–out.

SUBSTRATE:

MOBIHEL 2K FILLERS

REMARK:

Colour shade and lightness of metallic effect depend on the way of spraying, RTU viscosity, the type and settings of spraying gun.

PACKAGING:

6 x 0.5 l
6 x 1.0 l
3 x 3.5 l
  • MOBIHEL Colour Navigator Formulation Software

  • Stirring on mixing unit

  • Prior to application on the object a test spray-out must be made and the colour match cross checked.

  • MOBIHEL THINNER FOR BASE 3100 (approx. 60 %) for T applications between 5 – 27 °C
    MOBIHEL THINNER FOR BASE 3300 (approx. 60 %) for T applications between 27 – 40 °C

  • 20 – 22 s
    DIN 53211 ø 4 mm / 20 °C

  • 1,2 – 1,3 mm
    2 – 2,5 bar HVLP

  • 2 layers and effect:
    15 – 22 µm

  • 10 – 15 min/20 °C between layers and before application of clearcoat

  • Further treatment:
    MOBIHEL 2K CLEARCOATS

  • Colour pigments: 4 years
    Aluminium, pearl pigmets: 3 years

DOWNLOAD TDS COMPLEMENTARY PRODUCTS

MOBIHEL CLEAR BASE

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

For painting of MOBIHEL BASE with fade out technique. It helps to achieve a smooth homogeneous overspray area in the fade-out zone, avoiding dark shadows around the repair area.

SUBSTRATE:

Clean surface thoroughly with MOBIHEL ANTISILICONE CLEANER LOW VOC. MOBIHEL CLEAR BASE will be sprayed wet to vicinity of damaged part, afterwards we spray over wet Clear base MOBIHEL BASE in desired colour shade. Hereby we assure the suitable orientation of effective pigments.

PACKAGING:

6 x 0.5 l
  • MOBIHEL Clear base – ready to use
    1.2 – 1.3 mm
    2 bar
    1 wet layer

    MOBIHEL Base
    1.3 – 1.4 mm
    2 – 2.5 bar
    2 full layers = 15 – 22 μm

  • 10 – 15 min/20 °C

  • FURTHER TREATMENT:
    MOBIHEL 2K CLEARCOATS

  • 4 years

DOWNLOAD TDS COMPLEMENTARY PRODUCTS