OTHER PRODUCTS IN THIS CATEGORY

MOBIHEL 2K MATTING AGENT

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

MOBIHEL 2K MATTING AGENT is used to achieve the matting effect
of MOBIHEL 2K coatings. Maximum addition is 100 % of the total quantity. By the addition of MOBIHEL 2K MATTING AGENT the hiding power of colours decreases, therefore we do not recommend using with colour shades with a reduced hiding power! Dark colour shades require a higher quantity of MOBIHEL 2K MATTING AGENT for the same level of matt effect than lighter colours.

PACKAGING:

12 x 0.5 l 41887721
  • To MOBIHEL 2K ACRYLIC COATING we add
    MOBIHEL 2K MATTING AGENT coresponding
    to the desired gloss level.

  • MOBIHEL 2K HARDENER 1100 (18 – 27 °C)
    MOBIHEL 2K HARDENER 1300 (27 – 35 °C)
    MOBIHEL 2K HARDENER 1500 (5 – 18 °C)
    Volume mixing

  • Pot life: 2 h/20 °C

  • 18 – 20 s
    DIN 53211 ⌀ 4/20 °C
    10 – 20 %
    MOBIHEL 2K THINNER 2100 (18 – 27 °C)
    MOBIHEL 2K THINNER 2300 (27 – 35 °C)
    MOBIHEL 2K THINNER 2500 (5 – 18 °C)

  • 1.3 – 1.4 mm
    2 – 2,5 bar

  • 2 – 3 × = 50 – 60μm
    (depending on colour, hiding power and application)

  • 20 °C: 16 h
    60 °C: 30 min

  • 1 year

COMPLEMENTARY PRODUCTS

MOBIHEL 2K STRUCTURAL ADDITIVE COARSE & FINE

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

MOBIHEL 2K STRUCTURE ADDITIVE FINE OR COARSE will be used in case of painting plastic parts, when we wish to achieve a typical appearance of plastics (structure and matt effect). These additives may be used only in 2K colour shades. You can mix additive in any colour shade, but you should know that additive decreases a hiding power, which is especially important with colour shades having a worse hiding power.

SUBSTRATE PREPARATION:

MOBIHEL 2K STRUCTURE ADDITIVE FINE OR COARSE will be added in quantity 100 % to component A. Mixing is as follows:
1 part component A: 1 part additive and afterwards 2:1 mixing with a HARDENER. Thinning to working viscosity is not necessary. If you wish to additionally increase elasticity of coating, you may add 20 – 30 % MOBIHEL 2K ELASTIC ADDITIVE, which makes hiding power worse, therefore we do not recommend its use in colour shades with worse hiding power. In order to avoid too high coating’s thicknesses, that is not desired due to plastic’s elasticity, we recommend preceding one coat of MOBIHEL Base in similar colour as will be final 2K coat (e.g. under black 2K colour one coat Base MIX-361).

COLOUR:

Opaque white

PACKAGING:

12 x 0.5 l 41975301 fine
12 x 0.5 l 41974931 coarse
  • MOBIHEL 2K TOPCOATS

  • 1 year

DOWNLOAD TDS COMPLEMENTARY PRODUCTS

MOBIHEL 2K ELASTIC ADDITIVE

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

It is used to increase the elasticity of the material. 20 – 30 % will be added to component A, which may be Filler or Clearcoat. To complete quantity 2K HARDENER will be added in ratio, which is prescribed for individual product. At use of MOBIHEL 2K ELASTIC ADDITIVE VOC the drying of coating will be slightly prolonged.

SUBSTRATE PREPARATION:

If plastic parts were damaged, first clean, apply MOBIHEL PRIMER FOR PLASTIC LOW VOC, then MOBIHEL PE PUTTY FOR PLASTIC and then MOBIHEL 2K HS 4:1 COMPACTPRIMER LOW VOC, in which you add 20 – 30 % MOBIHEL 2K ELASTIC ADDITIVE VOC. As the final two-layer coating you use MOBIHEL BASE and MOBIHEL 2K CLEARCOAT, in which you add 20 – 30 % MOBIHEL 2K ELASTIC ADDITIVE VOC.

COLOUR:

Colorless

PACKAGING:

6 x 0.5 l 47056501
  • MOBIHEL FILLERS or MOBIHEL CLEARCOATS

  • MOBIHEL 2K HARDENER 1100 or 1300 or 1500
    or 4100 or 4300 or 4500
    MOBIHEL 2K HARDENER 700 or 750W
    In ratio as it is prescribed for individual products

  • 4 years

DOWNLOAD TDS COMPLEMENTARY PRODUCTS