OTHER PRODUCTS IN THIS CATEGORY

MOBIHEL PRIMER LOW VOC

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

  • One-component easy to apply and fast drying primer, chromate free.
  • Excellent anticorrosion properties.
  • Adhesion on all types of substrates (metal, zinc plated steel, aluminium).
  • Application with spray gun and brush.
  • Overcoatable with MOBIHEL fillers.

SUBSTRATE:

Used for the protection of steel, zinc-plated or aluminum metal sheets. The surface must be well sanded, cleaned from rust and degreased.

COLOUR:

Olive Green, Grey

PACKAGING:

6 x 1.0 l 40707102
6 x 1.0 l 40926402
  • 20 – 25 s
    DIN 53211 ø 4 mm / 20 °C
    MOBIHEL Primer THINNER (15 – 20 %)

  • 1.3 – 1.5 mm
    2 – 2,5 bar

  • 2 - 3
    50 - 60 μm

  • 50 s
    DIN 53211 ø 4 mm / 20 °C
    MOBIHEL PRIMER THINNER

  • 20 °C = 2 h
    60 °C = 20 min

  • FURTHER TREATMENT:
    - MOBIHEL 2K HS 4:1 Compactprimer low VOC
    - all MOBIHEL Topcoats

  • 2004/42/II B(c) (780) 720
    EU limit value VOC for this type of products (category II B (c) in form ready for application is 780 g/l. VOC of this product ready for use is 720 g/l.

  • 1 year

DOWNLOAD TDS COMPLEMENTARY PRODUCTS

MOBIHEL 2K HS 4:1 COMPACTPRIMER LOW VOC

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

  • High-build, acryl-isocyanate primer-filler.
  • VOC compliant.
  • Adhesion on all types of metals substrates.
  • Excellent (up to 180 μm) film-build.
  • Good vertical stability, filling properties.
  • Good isolating properties.
  • Easy to sand.
  • In-depth drying properties allow for a reduced process time and ensure an excellent surface for the subsequent top coats.

SUBSTRATE:

It may be applied directly to bare steel and zinc-plated steel and aluminum. In cases of unknown aluminum quality we recommend the application of one layer of MOBIHEL PRIMER LOW VOC for guaranteed results. The surface must be well sanded, cleaned from rust and degreased.

COLOUR:

White, Grey and Black. Possibility of mixing on the mixing unit.

PACKAGING:

6 x 1.0 l 41793802
6 x 1.0 l 41958002
6 x 1.0 l 41958112
3 x 3.5 l 41793833
3 x 3.5 l 41958033
3 x 3.5 l 41958133
  • MOBIHEL ANTISILICONE CLEANER LOW VOC
    MOBIHEL HYDRO DEGREASER

  • MOBIHEL 2K HARDENER 700 or
    MOBIHEL 2K HARDENER 750 W
    (for temperature applications 5 – 18 °C)
    Volume mixing

  • Pot life: 2 h/20 °C

  • 32 – 37 s
    DIN 53211 ⌀ 4 mm/20 °C
    MOBIHEL 2K THINNER 2100 (10%)

  • 1.6 – 2.0 mm
    2 – 2,5 bar

  • 1 -3 layers
    60 - 180 μm

  • 10 – 15 min between layers
    15 – 30 min before drying in oven

  • Thickness 60 μm:
    20 °C = 1,5 h
    60 °C = 20 min
    Thickness 180 μm:
    20 °C = 4 – 5 h
    60 °C = 30 min

  • 15 - 20 min
    Distance to the object: 70 – 80 cm

  • P360 – P600

  • P600 – P1200

  • FURTHER TREATMENT:
    all MOBIHEL topcoats

  • 2004/42/II B(c) (540) 530
    EU limit value VOC for this type of products
    (category II B (C)) in the form, which is ready for
    application is 540 g/l. VOC of this product,
    prepared for use is 530 g/l.

  • 2K-materials react with moisture; take care that all containers and tools are absolutely dry. While coating, the ambient relative humidity should not exceed 80%.

  • 18 months

DOWNLOAD TDS COMPLEMENTARY PRODUCTS

MOBIHEL 2K 3:1 FILLER UNIVERSAL LOW VOC

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

As the primer and filler in one with good corrosion protection.

  • Can be applied to bare metal such as steel, zinc and aluminium as well as all original factory primings and plastic parts.
  • Excellent adhesion.
  • Good sanding properties – wet or dry.
  • Ensures good topcoat gloss when used with MOBIHEL BASE MIX.

SUBSTRATE:

Used for the protection of steel, zinc-plated or aluminum metal sheets. The surface must be well sanded, cleaned from rust and degreased.

COLOUR:

Grey

PACKAGING:

6 x 0.75 l 41793602
  • MOBIHEL ANTISILICONE CLEANER LOW VOC
    MOBIHEL HYDRO DEGREASER

  • MOBIHEL 2K HARDENER 700
    Volume mixing

  • Pot life: 2 h/20 °C

  • 28 – 32 s DIN 53211 ⌀ 4/20 °C

  • 1,6 – 2,0 mm
    2 – 2.5 bar

  • 1 -3 layers
    40 - 120 μm

  • 10 – 15 min between coats
    15 – 30 min before drying in oven

  • Thickness 40 μm:
    20 °C = 1,5 h
    60 °C = 20 min

    Thickness 120 μm:
    20 °C = 4 – 5 h
    60 °C = 30 min

  • 15 - 20 min
    Distance to the object: 70 – 80 cm

  • P360 – P600

  • P600 – P1200

  • Further treatment:
    All MOBIHEL topcoats

  • 2004/42/II B(c) (540) 530
    EU limit value VOC for this type of products
    (category II B (C)) in the form, which is ready for
    application is 540 g/l. VOC of this product,
    prepared for use is 530 g/l.

  • 2K materials react with humidity; take care that all
    containers and tools are absolutely dry. While coating,
    the ambient relative humidity should not exceed 80%.

  • 18 months

DOWNLOAD TDS COMPLEMENTARY PRODUCTS

MOBIHEL 2K HS 3:1 FILLER W/W LOW VOC

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

Primer and filler combination for car bodies, with good corrosion protection. The filler is applied according to the “wet on wet” system (requires thinning) or as a normal filler to sand that is ready for spraying after a suitable HARDENER is added. Particularly recommended for use on new cataphoresis-coated protected spare parts.

SUBSTRATE:

Used for the protection of steel. The surface must be well sanded, cleaned from rust and degreased.

COLOUR:

Grey

PACKAGING:

6 x 0.75 l 47843502
  • MOBIHEL ANTISILICONE CLEANER LOW VOC
    MOBIHEL HYDRO DEGREASER

  • MOBIHEL 2K HARDENER 700
    Volume mixing

  • Pot life: 1 h/20 °C

  • WET PAINTING:
    15 –17 s DIN 53211 ⌀ 4 mm/20 °C
    MOBIHEL 2K THINNER 2100 (10 %)
    SANDING FILLER: no thinning

  • WET PAINTING:
    1.2 – 1.4 mm 2 – 2.5 bar;m1 – 2 layers: 30 – 40 μm
    SANDING FILLER:
    1.2 – 1.4 mm 2 – 2.5 bar; 2 – 3 layers: 60 – 100 μm

    CAUTION:
    The filler has a somewhat higher gloss than other fillers in the MOBIHEL program, therefore it is not necessary to wait until matt between layers.

  • WET PAINTING:
    5 – 10 min between layers
    20 – 30 min before application of MOBIHEL
    solvent-based top coating min. 30 min before
    application of MOBIHEL HYDRO Base
    SANDING FILLER:
    5 – 10 min between layers

  • WET PAINTING:
    The surface should be lightly sanded with grey fine
    sanding mesh prior to applying the top coat if more
    than 5 hours have passed since application of the filler.
    SANDING FILLER:
    20 °C: 3 – 4 hours
    60 °C: 30 min

  • SANDING FILLER:
    15 – 20 min
    Distance to the object: 70 – 80 cm

  • SANDING FILLER:
    P360 – P600

  • SANDING FILLER:
    P600 – P1200

  • Further treatment:
    All MOBIHEL topcoats

  • 2004/42/II B(c) (540) 515
    EU limit value VOC for this type of products
    (category II B (C)) in the form, which is ready for
    application is 540 g/l. VOC of this product,
    prepared for use is 515 g/l.

  • 2K materials react with humidity; take care that all
    containers and tools are absolutely dry. While coating,
    the ambient relative humidity should not exceed 80%.

  • 18 months

DOWNLOAD TDS COMPLEMENTARY PRODUCTS

MOBIHEL PRIMER FOR PLASTIC

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

  • 1K Primer for use in 3-stage plastic painting system.
  • Adhesion to all exterior plastic car parts.
  • Ready to spray.
  • Very fast drying.
  • Overcoat with MOBIHEL 2K fillers or MOBIHEL topcoats.

SUBSTRATE:

Suitable for following types of plastics: PP, PP/EPDM, ABS,
PC, PA, PUR, PPO. Not suitable for painting of polyethylene.
Substrates must be thoCOARSEly cleaned with MOBIHEL CLEANER FOR PLASTICS.

SUBSTRATE PREPARATION:

Plastic parts should be cleaned thoroughly before painting with MOBIHEL Cleaner for plastics low VOC. Then apply MOBIHEL Primer for plastics low VOC in a thin coat (dry film thickness 3-5µm).
If plastic parts were damaged, you can apply to MOBIHEL Primer for plastics low VOC MOBIHEL PE putty for plastics (if necessary), then MOBIHEL 2K HS 4:1 Compactprimer low VOC (in which it is obligatory necessary to add 20-30% MOBIHEL 2K elastic additive).

COLOUR:

Transparent

PACKAGING:

6 x 0.5 l 41675501

  • MOBIHEL PRIMER FOR PLASTIC

  • 1,2 – 1,3 mm
    1 – 1,5 bar

  • 1 layer
    3 – 5 μm

  • 20 °C = 10 min

  • 2004/42/II B(e) (840) 800
    EU limit value VOC for this type of products
    (category II B (e) in form ready for application is 840 g/l.
    VOC of this product ready for use is 800 g/l.

  • 18 months

DOWNLOAD TDS COMPLEMENTARY PRODUCTS

MOBIHEL NC FILLER

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

One component quick drying sealer based on nitrocellulose for repair of personal vehicles.

SUBSTRATE:

Always only on sheet metal which was protected with MOBIHEL PRIMER in advance.

COLOUR:

Gray

PACKAGING:

6 x 0.25 l 40707412
  • 23 – 30 s
    DIN 53211 ⌀ 4 mm/20 °C
    MOBIHEL NC THINNER (15 – 20 %)

  • 1.5 mm
    2 – 4 bar
    2 × = 40 μm

  • 10 min

  • 20° C = 60 min
    60° C = 15 min
    80° C = 10 min

  • P 600 – 1200

  • FURTHER TREATMENT:
    MOBIHEL PE putty fine (if necessary)
    MOBIHEL Car enamel

  • 1 year

COMPLEMENTARY PRODUCTS

MOBIHEL ANTIGRAVEL LOW VOC

VOC COMPLIANT:

YES  YES  NO  NO 

USE:

One component protective coating based on modified rubber for protection of sills, wheel arches and underbody against stone-chipping. It is resistant to salt, humidity, oil and gasolines. Immediately overcoatable after drying.

REMARK:

Substrates must be cleaned with MOBIHEL ANTISILICONE CLEANER prior to application. 

COLOUR:

Gray and black

PACKAGING:

6 x 1.0 kg 47056102
6 x 1.0 kg 47056202
  • 40x

  • 3 – 5 bar
    2 – 3x

  • min. 5 °C

  • 20 ° C: 60 – 90 min
    60 °C: 30 min

  • 2004/42/II B(e) (840) 400
    EU limit value VOC for this type of product (category II B ( e)) in the form, ready for application is 840 g/l.
    VOC of this product ready for use is 400 g/l.

  • 2 years

DOWNLOAD TDS COMPLEMENTARY PRODUCTS